TriboTEX Review
If youâre looking for ways to power up your engine, you should consider oil additives. Well, thatâs exactly what this TriboTEX review is all about. As long as you follow the manufacturerâs recommendations normal engine oil will take care of your engine. But, the oil will fragment over time.
The thickness of the engine oil will reduce over time, and it will become thinner due to contaminants. As a result, the lubricating power will reduce. This will lead to more friction and wear and tear which can ultimately damage your engine.
Review contents:
However, finding the best oil additive can be a daunting task. Here, in the TriboTEX review, Iâll discuss the product in detail, list its features, pros, and cons. By the end of the review, youâll be able to judge if the product suits your requirement.
TriboTEX â Is it the best engine oil additive on the market?
TriboTEX Car Engine Oil Additive is based on an innovative technology aimed at enhancing the performance and life of engines. The additive boosts the engineâs horsepower, gas mileage, and reverse wear. All of this is done with the help of anisotropic nanoparticle technology.
Ground-breaking nanotechnology
The nanoparticles have two surfaces: a sticky surface to bind with the base and a slippery surface to minimize friction. Nanoparticles attach to the surface of the engine one after the other to form a film. This film or layer then repairs some wear and tear caused by contaminants.
In 2017, TriboTEX Car Engine Oil Additive received the Defense Innovation Award by TechConnect and was used by top participants in the 2650 HP world champion unlimited hydroplane boat Miss Madison. So, you can imagine the power of this car engine oil additive.
Protective coating
After using the product for about 550 miles, I noticed a diamond-like carbon coating (DLC) formation on the reverse repair bearings and wears. Cars are mostly discarded after almost 200k miles due to the heat and stress caused by friction within the engine which leads to decreased efficiency and lost compression.
I only noticed the coating formation on metal bearing exteriors. The coating looked similar to a ceramic protective veneer found in certain high-performance engines.
Itâs pretty easy to use the product. All you need to do is warm up your engine and squeeze approximately 20ml of TriboTEX to the oil tank. You can also add it to a cold engine or during a regular oil change. As Iâve mentioned above, once you drive 500 miles, youâll notice the DLC coating. I add TriboTEX every 40,000 miles.
Compatibility
When it comes to the compatibility, the product works well with different types of motor oils, both synthetic and conventional, and can be used with diesel or gas engines. I use TriboTEX for my Toyota Camry. You can use it with different vehicles such as BMW 3 Series, Ford F150, Chevy V8s, and Dodge pickups.
For lawn mowers, motorbikes, and other small equipment using engines, you can use TriboTEXâs small engine treatment. For vehicles with engines that can hold over 8 liters of oil such as diesel trucks and sportscars, you can use TriboTEXâs diesel treatment.
Overall, Iâm very satisfied with the product and will continue to use TriboTEX for the years to come. After every oil change, I notice more and more improvement. Trust me, TriboTEX reduces friction ten to twelve times more than just engine oil.
Apart from enhancing protection and lubrication, TriboTEX also minimizes reverse wear by getting embedded in scratches and pits. It also reduces noise levels of the metal bearings and filters. By simply adding TriboTEX to your engine oil, you can increase the efficiency of your car and make sure it runs longer.
- Improves gas mileage
- Increases the efficiency of your engine oil
- Provides better engine lubrication
- Helps in reducing friction
- Protects the engine from wear and tear
- Provides smoother and quieter performance
- Comes with universal compatibility; is compatible with all car makes and models
- Betters fuel consumption
- Brings down engine noise
- Non-toxic and 100% safe
- Reduces fuel cost
- Is not suitable for diesel trucks, high-performance sports cars, motorbikes, lawn mowers, etc.
- Works best with old cars
- Expensive when compared to other oil additives on the market
Notable features of TriboTEX Car Engine Oil Additive
- Made in the USA using Nanotechnology
- Reverses wear and tear in engine by forming a diamond-like carbon coating
- Reduces engine noise dramatically
- Fuel economy improved by 6-8%
- Comes with 100% satisfaction guarantee
- Eco-friendly and non-toxic
- Increases gas mileage and power
- Works well with diesel as well as gas cars
- Removes dirt, varnish, and contaminants from the engine
- Compounds present in the oil additive allow smoother running and improve lubrication
- Works will with new and oil vehicles
- Inhibits the formation of rust
- Adds approximately 3% more power to your engine without disintegration
- Does not damage the catalytic converters on new cars
What customers are saying about TriboTEX Car Engine Oil Additive?
I scanned through the existing customer reviews and hereâs what I found:
- TriboTEX leads to approximately 1.8% increase in gas mileage and a slight improvement in oil pressure.
- Many customers noticed substantial improvements in engine noise and power. They feel their engines function like new engines since they started using TriboTEX.
- Some customers are using TriboTEX with different vehicles and have noticed gas mileage improvement in all. So, the oil additive works well with different car makes and models. They tried other oil treatments such as Prolong and Marvel Mystery, but none of them are as effective as TriboTEX.
- Most of the customers have mentioned that they wonât be changing their oil additive at least for the next 4-5 years. Theyâre highly satisfied with the results after using TriboTEX.
- Many customers have mentioned that theyâre surprised to see the reduction in oil consumption. Theyâre now spending less on engine refueling than before.
- Very few customers have mentioned that TriboTEX damaged their engine and is more like a placebo effect. They also found the product very expensive.
How to use TriboTEX Car Engine Oil Additive?
TriboTEX works well with a variety of vehicles such as vintage cars, luxury cars, sedans, diesel cars, hybrid trucks, etc.
Follow these steps to use TriboTEX Car Engine Oil Additive:
- Drive your car a little to heat up the engine oil.
- Open the oil tank and eject the liquid in the syringe.
- Donât drive the car for at least 15 minutes and allow it to rest.
The oil additive starts working within 15 minutes after adding it. Unlike many other oil additives on the market, TriboTEX can last up to 40000 miles.
Useful tips to pick the best car engine oil additive on the market
There are 4 key performance factors you need to keep in mind while choosing a car engine oil additive for your vehicle. These include:
- Reduction in friction: The interaction between metal bearings and other metallic components of your engine can increased friction which can damage your engine. This is where the importance of engine oil additives comes into the picture. They help in preventing wear and tear caused by friction and reversing any existing wear. This ultimately increases the longevity of the year.
- Mileage increase: Choose engine oil additives that provide at least a 1-2% increase in the mileage after your first oil change. Less stress on your engine means more saving on your fuel cost.
- Banned chemicals: Certain chemicals banned by the government can create havoc in the environment and make things worse for your vehicleâs engine. So, make sure the engine oil additive youâre using does not contain any banned chemicals.
- Compatibility: While most of the car engine oil additives on the market come with universal compatibility, make sure the engine oil additive youâre picking is compatible with the make and model of your vehicle.
Once you nail all the 4 factors mentioned here, youâll be able to find the best possible engine oil additive for your vehicle.
Frequently asked questions about TriboTEX
Contents:
What is TriboTEX oil additive?
TriboTEX is an innovation in the engine technology. It is a car engine oil additive made of nanoparticles that get attached to the surface the surface of the engines to make them last longer, increase mileage of your vehicle, reduce friction and noise, and prevent the disintegration of engine oil.
Scratches or other wear and tear on your engine can be reversed using TriboTEX.
Does TriboTEX really work?
Yes, TriboTEX actually works. Iâve tried and tested the product over and over again. Even though many car owners are skeptical about using engine oil additives; itâs important to note that engine oil additives repair your engine and reduce noise.
They boost your fuel efficiency and increase the mileage of your vehicle. Theyâre recommended for all cars, especially the older ones. They can also cut down the carbo build-up on your engine.
When do I use TriboTEX?
All you need to do is add TriboTEX to your engine oil during your next oil change session. Within 12-15 minutes, youâll begin to notice a difference in the noise of your engine. And, once you drive 500 miles or more, youâll feel the difference in horsepower and gas mileage as well.
Change your engine oil after ever 3000 to 5000 miles. It is recommended to use TriboTEX after every interval of 40000 miles.
Does TriboTEX come with a guarantee?
Yes, TriboTEX comes with 100% satisfaction and money-back guarantee.
How is TriboTEX different from other engine oil additives on the market?
TriboTEX is different from all other engine oil additives on the market. Itâs basically an engine coating technology and works by reversing any wear and tear on your engine by forming a diamond-like carbon coating on your engineâs metal bearings and wear bases.
Other engine oil treatments on the market are aimed at changing or improving the features of the engine oil and not the engine.
Competitor comparison chart
TriboTEX | Prolong | Slick50 | |
The frequency of use | Every 10th change | Every oil change | Every oil change |
Reduces friction | Yes | No | No |
Improves mileage | Yes | No | No |
Reduces emissions | Yes | No | No |
Increases Horsepower | Yes | No | Yes |
Stabilizes engine oil | Yes | No | No |
Eco-friendly | Yes | No | No |
Does not clog filters | Yes | Yes | No |
Reverse wear | Yes | No | No |
Cost/application | $99 | $24.99 | $19.28 |
Cost/40000 miles | $99 | $249.90 | $192.80 |
Final thoughts
Iâve tried and tested TriboTEX first-hand and have presented the details on my experience with the product in the TriboTEX review above. Iâm really satisfied with my purchase and use the oil for all my vehicles.
If youâre using some other engine oil additive, why donât you try TriboTEX and see the results yourself? I hope you find this review article helpful. If you have any other questions, please feel free to post them in the comments section below. Iâll get back to you with the answers soon.
Pasha says
Thank you for a well researched review!
Tee Won says
Thank you for the effort. I have my Tribotex in hand. Oil change tomorrow Acura RL, 165000 miles. Averaging,18.2 mpg â 70 miles round-trip daily â mix of city/highway. Average time 90 minutes each way.
Tom says
I keep hearing about TriboTex from forums but found most amazing results in absolutely unusual place: Brand New Audi Q7 2017! Got it new from a dealer and within few months learned that it burns over a quart of oil for 1000 miles(!) There was no new car that i had with such a crasy high oil consumption. And Audi tech support said it is normal! I was quite bummed but decided to try tribotex. I put one syringe of original mid oil change and oil consumption was cut in half. Than changed oil and added a second syringe. The oil consumpion stopped completely and engine got smoother than a glass and even quieter inside of a vehicle. I am amazed and recomend it to all my friends now. Certainly cheaper than a ring job and no messing with a new factory engine even at dealers cost.
Joe Sanford says
The problem I have is the Audis and Porsches were designed to use oil, whuch means their specs allow for a certain amount of consumption to optimize performance. To use and additive that eliminates that worries me a bit that there may be longer term and unforeseen consequences to changing the dynamic of how an engine was designed to operate. My Cayenne uses about 1 liter every 2-3K miles, but I also enjoy the 500+ HP it provides so I maintain it the way the manufacturer recommends. Not sure about the Q7 but the Cayenne holds approx 9 liters of oil so that may also make a difference. I canât see spending $220 for an additive when I can use Ceratec for $22 that has a proven track record with high performance engines, whereas, the Tribotex specifically says it is not recommended for high performance sports cars. Just my two cents.
Kyle McCombs says
It works on diesels and small engines. Did wonders for my fleet.
David OCONNOR says
Can I use it on my 2011 Ford F 150 Ecoboost engine
Doug says
I am looking for a good additive for my Ram 2006 2500 SLT 5.9L diesel. I hope you can point me in a good direction.
Christian A. Burmester says
Hi,
I was backer on your last campaign on Kickstarter. And waiting very much for the stuff from you. I live in Denmark, you know,âŠand have a slight issue I need to clear with you. You have a guy in your distribution-dept. with an e-mail? Thank you in advance for your assistance. BR Chr. Burmester
Robert Johnson says
One of the cons says that it does not work in high performance sports cars and I am assuming that means things like high performance supercharged street engines. Will it work in these engines after the rings are seated.
John Boyd says
I have a 4 cylinder VW with one cylinder with very low compression. Mechanics talk about putting engine oil or MMO in the spark plug holes and letting it seat of a few hours then start and blow the smoke out which frees the oil recovery ring of slug. Would this work for that one low compression cylinder if I put tribo tec in that spark plug hole to coat that cylinder.