A side view mirror is an integral piece of equipment on every car. The side vision mirror helps the driver look behind and to the car’s edges, avoiding collisions when shifting directions. To pass a vehicle inspection the side view mirrors must be present and functional. With today’s advanced technology, almost any part of the car can be viewed from the driver’s seat. Such as, it may be the steering wheel, back seat, or even the driver’s seat itself. That is why, to show the driver what is on the other side of the vehicle, it is important to have a proper car side view mirror.

The mirror must be an integral part of the vehicle’s structure. Without this, the driver will not be able to get a proper view of the other side of the car. The driver will not be able to see clearly what he or she is around. This may lead to an accident if not properly monitored. So, to properly monitor the side view mirror, it should be properly manufactured. When harm happens to a side view mirror, it is necessary to remove the mirror immediately to avoid accidents. Replacing a side view mirror is an easy job and can be completed at home by anybody.

How to Fix Side Mirror on a Car With Glue?

There are a few basic things that you will need to keep in mind when trying to fix a mirror. One of the most important parts of the mirror is the frame. If the frame is not in good shape, then you can be sure that you will have a hard time fixing it. It is important to know how to glue a side view mirror onto a car with glue, but also to know how to change it if necessary. Once you know how to fix a mirror, it is very simple to go back and change the way you put it on again in case you have made any mistakes.

Also, you should note that most mirrors do not have hinges and are fixed on the corners. However, there are still some that come with mounting holes. This means that you should first lift the car’s side mirror from the base. Then, you can slide the bracket over it. Usually, the mounting holes are behind the mirror. On the other hand, some models include mounting holes to make it easier for you to mount it. However, in most cases, the mounting holes are right above the mirror and in front of the license-plate holder.

First, you should use a tape measure on the mirror frame to mark the mounting holes on the other side. This is important so you will not cut yourself and make sure that you will not make a mistake while installing the mirror. When removing the old mirror wear protective goggles and rubber gloves for protection. Put a wide bucket under the mirror to collect any bits of broken glass.

After you have removed the mirror, you should wipe off the area with a sponge and then start putting in the repair kit. Be sure that you have a flat surface to work on so that you can make sure that the repaired area will not be distorted. Use the tape measure and chalk line to make sure that the repaired area is even. Then, you can smooth the mirror and the frame by using a cloth. At this point, you should replace the mirror. Try to find a mirror that matches the frame because that is where the inside is located.

Before you apply glue, you should note that most side mirrors have a flat side and a curved one. This means that if you want to achieve a rectangular mirror, you need to first cut a rectangle shape. To prevent it from curving, you can use a tool such as a utility knife to keep it straight.

After you have made sure that the mirror is straight, you can now start placing the new mirror in the frame. You must use a good grade of glue or adhesive to make sure that it will not become too loose in the middle. You also need to make sure that you will not use it too much because it might cause scratches in the mirror. It is highly recommended using a heat gun when applying the glue and make sure you clean the remaining residual glue or adhesive with a wet cloth. Do not use chemical additives on the mirror housing otherwise the glue or adhesive will not hold. Be sure to wipe off the mirror on both sides too.